DMS-302 - Stand-Alone Die Protection Unit
The DMS-302 Die Monitoring System was designed especially to monitor up to four stations at the same time
using our B-500 Series Modules. That means four separate stations working simultaneously, each one carefully
monitored.
With one purchase, you have bought the flexibility you need to grow with your business. Just add or change
modules as your needs change. If you have a problem with any combination of material misfeeding, parts
not ejecting properly causing double hits, material buckling, etc., simply choose any of our B-500 series
modules to equip the DMS-302.
The DMS-302 unit is typically used on presses under 150 tons. It is a low cost stand alone package for automatic presses.
Features
| Standard | Option | |
| Nema 12 enclosure |  |
|
| Bypass switches on all modules | |
|
| On/off switch | |
|
| Run/bypass switch | |
|
| Reset | |
|
| Four shock mount absorbers | |
|
| Expandable | |
Modules/Specs
| Module | Available Modules |
| B-501 Misfeed | Optional |
| B-502 Part Ejection | Optional |
| B-503 Buckle Probe | Optional |
| B-504 Cam Check | Standard |
| B-505 Two Station Buckle Probe | Optional |
| B-506 Two Station Misfeed | Optional |
| B-507 One Misfeed & One Buckle Probe | Optional |
| General Specifications | |
| Power Requirements | 115 VAC, 50/60Hz |
| Voltage Tolerance | +/- 10 VAC |
| Power Supply to Die Sensors | 18 VDC, 180 mA (max) to sensors |
| Sensor Inputs | Ground probes; fiber optic and proximity sensors with npn sinking output |
| Outputs | Emergency stop (dry contact) |
| Operational Speed | Up to 1200 SPM with proper sensor |
| Width | Height | Depth | |
| Dimensions | 10.5 " | 7.5 " | 6.25 " |
Manual/Downloads
| Name | Format | Link |
| User Manual |  |
Accessories/Related
| Type | Name | Description | Link |
| Service | Installation | On-site product installation |  |
